PROPER HOSE ASSEMBLY WITH A 2-PIECE COUPLING

PREASSEMBLY USING TWO-PIECE FITTINGS (P, GS & GSP).

1. Put the ferrule onto the end of the hose, bottoming it out

2. IF necessary, lubricate the first two or three serrations on the stem with light weight oil

3. Insert the stem into the hose . Hose should be flush against the stem shoulder. IF necessary, clamp stem in vise on hex portion and push hose onto stem .

4. Cutaway of assembly above shows the hose has bottomed against stem shoulder . To check for full insertion, pull the ferrule down . The stem shoulder should be level with the top of the ferrule

5. Push ferrule so it rests against hex of stem . Hose and coupling are now ready for crimping