C5C HYDRAULIC HOSE - SAE 100R5

RECOMMENDED FOR Medium–pressure hydraulic petroleum–based oil lines in impulse applications, lube oil, air and water in applications such as air brakes, power steering (CAUTION: Intended for heavy–duty commercial vehicle use only), turbocharger oil supplies, tilt cab cylinders, transmission coolant and filtration lines. Meets or exceeds requirements of SAE 100R5 for traditional hydraulic applications, DOT FMVSS 106–74 Type AII and SAE J1402 Type AII for air brake applications (–4 to –12). Not recommended for gasoline or diesel fuel.

TUBE Black, oil and heat–resistant synthetic rubber (Polychloroprene –4 and –5), (Nitrile –6 through –40). See Hose Stock Characteristics.

REINFORCEMENT One braid of high–tensile carbon steel wire over one braid of polyester.

COVER Black, oil and mildew resistant, polyester braid.

TEMPERATURE RANGE Under SAE 100R5 (hydraulic) conditions –40°F to +212°F (–40°C to +100°C). All–purpose fleet application (hot lube oil lines) –40°F to +300°F (–40°C to +149°C). Air to +160°F (+71°C) only. Avoid continuous use at maximum temperature concurrent with maximum working pressures. For water emulsions see Temperature Limits Table.

COUPLING RECOMMENDATION C5 Field Attachable Couplings (–4 through –32) (G34) Section K C5X Field Attachable Couplings (–5, –8, and –12) (G34) Section K (See Crimp Data Manual 428–7365 or eCrimp) DOT FMVSS 106–74 Type AII and SAE J1402 Type AII for air brake applications (–4 to –12).

• 86605 4C5C X50FT

• 70589 4C5CXREEL

• 86606 5C5C X50FT

• 70590 5C5CXREEL

• 86607 6C5C X50FT

• 70591 6C5CXREEL

• 86608 8C5C X50FT

• 70592 8C5CXREEL

• 86609 10C5C X50FT

• 70593 10C5CXREEL

• 86610 12C5C X50FT

• 70594 12C5CXREEL

• 86616 16C5C X50FT

• 70595 16C5CXREEL

• 86617 20C5C X25FT

• 70096 20C5CXCTN

• 70097 24C5CXCTN

• 70098 32C5CXCTN

• 70099 40C5CXCTN