Gates offers the following hoses that meet 100R8 specifications
Click on the hose you need to see PSI information for each size
Embedded Files
Fiber reinforcement
SAE J1402
NOTE: Federal law requires registration with the Department of Transportation for anyone producing air brake hose assemblies with swaged or crimped fittings. See Engineering and Technical Data Section for compliance.
–40°F to +212°F
Permanent coupling: G33
SAE J1402
NOTE: Federal law requires registration with the Department of Transportation for anyone producing air brake hose assemblies with swaged or crimped fittings. See Engineering and Technical Data Section for compliance.
225 PSI
–40°F to +212°F
Permanent coupling: G33
Steel reinforcement
SAE J1402
NOTE: Federal law requires registration with the Department of Transportation for anyone producing air brake hose assemblies with swaged or crimped fittings. See Engineering and Technical Data Section for compliance.
500 PSI
–40°F to +250°F
Permanent coupling: G25
SAE J1402
NOTE: Federal law requires registration with the Department of Transportation for anyone producing air brake hose assemblies with swaged or crimped fittings. See Engineering and Technical Data Section for compliance.
1,000 PSI
Petroleum–base fluids: –40°F to +300°F (–40°C to +149°C). Phosphate esters fluids as recommended by the fluid manufacturer, but within a range of –40°F to +212°F (–40°C to +100°C)
Permanent coupling: G25
NOTE: Registration with the Department of Transportation NOT required when using field attachable couplings.
SAE J1402
Under SAE 100R5 (hydraulic) conditions –40°F to +212°F (–40°C to +100°C). All–purpose fleet application (hot lube oil lines) –40°F to +300°F (–40°C to +149°C). Air to +160°F (+71°C) only. Avoid continuous use at maximum temperature concurrent with maximum working pressures.
Field attachable coupling: G34
NOTE: Registration with the Department of Transportation NOT required when using field attachable couplings.
SAE J1402
–40°F to +300°F (–40°C to +149°C). Air to +250°F (+121°C) only, maximum phosphate esters to +212°F (+100°C).
Field attachable coupling: G34
NOTE: Registration with the Department of Transportation NOT required when using field attachable couplings.
SAE J1402
–40°F to +300°F (–40°C to +149°C). Air to +250°F (+121°C) only, maximum phosphate esters to +212°F (+100°C).
Field attachable coupling: G35
Page updated
Google Sites
Report abuse